Nonnybest electrical 

A 5kWh Lithium Battery is a high-performance power storage pack that holds 5,000 watts of electricity. It replaces heavy, old-fashioned lead-acid or tubular battery banks. These batteries are perfect for home and office inverter setups.

Squid 5KWH Lithium Battery

11kVA HUIHANG Hybrid Solar Inverter, built for stable, efficient and reliable backup power. It works with solar panels, batteries and grid/generator supply, giving you flexible power for heavy household and commercial use.

Key Features:

11kVA high-capacity output
Hybrid solar inverter system
Supports solar, battery and utility power
Suitable for homes, offices, shops and small businesses
Helps reduce generator use and fuel cost
Stable power for appliances and sensitive electronics

Best for: ACs, freezers, TVs, lighting, computers, pumps and office equipment.

11kva HUIHANG Hybrid Solar Inverter

This 200W LED Flood Light is a high-performance portable lighting solution designed to deliver powerful brightness for indoor and outdoor use. Built with four advanced LED panels and reflective chambers, it provides wide-angle illumination with strong light output, making it ideal for security lighting, construction sites, warehouses, workshops, garages, events, and emergency backup use. Its durable body is engineered for long-lasting performance, while the compact standing base allows stable placement on floors, tables, or work areas.
The flood light is energy-efficient, consuming less power compared to traditional halogen lamps while producing brighter and clearer light. It is suitable for both residential and commercial environments where dependable lighting is needed. The 100W rating indicates strong illumination capacity, ideal for covering larger spaces with ease. Many models in this category are built with weather-resistant housing for outdoor durability.

200W LED Flood Light

This 100W LED Flood Light is a high-performance portable lighting solution designed to deliver powerful brightness for indoor and outdoor use. Built with four advanced LED panels and reflective chambers, it provides wide-angle illumination with strong light output, making it ideal for security lighting, construction sites, warehouses, workshops, garages, events, and emergency backup use. Its durable body is engineered for long-lasting performance, while the compact standing base allows stable placement on floors, tables, or work areas.
The flood light is energy-efficient, consuming less power compared to traditional halogen lamps while producing brighter and clearer light. It is suitable for both residential and commercial environments where dependable lighting is needed. The 100W rating indicates strong illumination capacity, ideal for covering larger spaces with ease. Many models in this category are built with weather-resistant housing for outdoor durability.

100W LED Flood Light

The SAKO ESS 5-in-1 is a compact all-in-one energy storage and power backup system designed to provide reliable electricity for homes, offices, and off-grid environments. It combines five essential power functions into one unit: an inverter, MPPT solar charge controller, AC charger, 12V DC output, and USB charging port. This smart system can receive power from solar panels, the public grid, or battery storage, then distribute clean and stable energy to appliances such as lights, fans, TVs, routers, and mobile devices. Its built-in battery level indicator, power controls, and multiple output options make it convenient for everyday use, especially in areas with unstable electricity supply. The SAKO ESS 5-in-1 is an efficient and practical solution for solar backup power, helping users reduce dependence on generators and lower electricity costs.

SAKO ESS 5-in-1 portable energy storage / solar backup power unit

The ColaSolar 10.2KW All-in-One Hybrid Inverter (PH21-10.2K) combines an inverter, solar charge controller, and battery into a single compact unit.

🔧 Key Features
* 10.2KW / 10.2KVA Output Power – Handles heavy loads and multiple appliances simultaneously
* All-in-One Design – Built-in inverter, MPPT charge controller, and AC charger
* Pure Sine Wave Output – Safe for sensitive electronics and appliances
* 48V Battery System – Compatible with lithium and tubular batteries
* Advanced MPPT Technology – Maximizes solar energy efficiency and charging performance  
* LCD Display + Smart Controls – Easy monitoring of system performance and settings
* Multiple Power Sources – Works with solar panels, PHCN (grid), and generator
* Automatic Switching – Seamless transition during power outages

📊 Technical Specifications
* Rated Power: 10,200W (10.2KW)
* Battery Voltage: 48V DC
* Output Voltage: 220–230V AC
* Frequency: 50/60Hz
* Charging Technology: MPPT Solar Charger
* Efficiency: Up to 94–95%  
* Display: LCD Screen with LED Indicators 

🏠 What Can It Power?
This inverter is suitable for powering:
* Air conditioners (1–2 units depending on size)
* Refrigerators & freezers
* TVs, fans, and lighting
* Office equipment & POS systems
* Small business setups (shops, salons, offices)

A 10.2KW inverter can deliver strong backup power for homes and businesses during outages. 

🎯 Ideal For
* Homes with high energy demand
* Offices and commercial spaces
* Solar installations with lithium batteries
* Users looking for a complete solar solution in one unit

Colasolar 10.2kVA 48V Hybrid Inverter

CMONE DZ47-125 125A 3-Pole MCB is a heavy-duty circuit protection device designed to safeguard electrical systems from overload and short circuit damage. Built for high-current applications, this breaker is ideal for industrial setups, large homes, and commercial installations where reliable protection is critical.

Key Specifications
Brand: CMONE
Model: DZ47-125
Rated Current: 125 Amps
Rated Voltage: 400V AC
Frequency: 50Hz
Poles: 3 Pole (3P)
Standard: IEC 60898 / IEC 60947-2
Breaking Capacity: High-performance protection
Mounting: DIN Rail

Key Features
Overload Protection: Trips when current exceeds 125A
Short Circuit Protection: Instantly cuts off fault current
3-Pole Design: Suitable for three-phase systems
Manual Switch Control: Easy ON/OFF operation
Status Indicator: Clear visibility of switch position
Heavy-Duty Build: Designed for high load environments
Secure Terminals: Strong connections for thick cables

Applications
Industrial electrical panels
Commercial buildings
Large residential power systems
Generator and inverter protection setups
Three-phase distribution systems
What It Does (Important)
Protects cables and equipment from damage
Prevents electrical fire risks
Automatically disconnects faulty circuits
Not a changeover switch (does not switch between power sources)
What It Can Handle

This 125A breaker is suitable for:
High-capacity electrical loads
Large inverters and generators
Multiple heavy appliances and machinery

CMONE DZ47-125 125A 3-Pole MCB

Shairm Select IC60N C25A 3-Pole MCB is a reliable electrical protection device designed to automatically disconnect power in case of overload or short circuit. Unlike a transfer switch, this breaker protects your electrical system by stopping excessive current flow, helping prevent equipment damage, fire hazards, and system failure.

Key Specifications
Brand: Shairm Select
Model: IC60N
Rated Current: 25 Amps
Type: C Curve (moderate inrush loads)
Poles: 3 Pole (3P)
Application Voltage: Suitable for standard AC systems
Mounting: DIN Rail
Switch Status Indicator: ON / OFF display

Key Features
Overload Protection: Trips when current exceeds safe limit
Short Circuit Protection: Instantly disconnects faulty circuits
3-Pole Design: Ideal for three-phase systems
Manual Reset: Can be switched back ON after trip
Durable Build: Designed for long-term use in panels
Clear Status Indicator: Easy to see ON/OFF position

Applications
Electrical distribution boards
Industrial and commercial systems
Three-phase power installations
Motor and equipment protection
Solar and inverter setups (as protection device)
What It Does (Important for Customers)
Protects wiring and appliances
Prevents electrical fires
Automatically shuts down faulty circuits
Does NOT switch between power sources (not a changeover switch)
Why Customers Buy This
Essential safety component
Reliable circuit protection
Easy installation and replacement
Suitable for homes, shops, and industrial use

Installation Note
Should be installed by a qualified electrician to ensure correct load matching and wiring.

Shairm  IC60N C25A 3-Pole MCB

The CMONE Manual Transfer Switch is a reliable solution for switching between two power sources such as PHCN (grid) and generator or inverter systems. Available in 63A and 125A variants, this switch is designed to provide safe, manual control of your power supply while preventing electrical backflow and system damage.

Available Variants
1. 63A (SFT 263) – Compact Option
Voltage: 400V
Poles: 2 Pole
Best For:
Small homes
Basic inverter setups
Light electrical loads
2. 125A (SF125) – Heavy-Duty Option
Voltage: 230V
Poles: 4 Pole
Best For:
Large homes
Offices & shops
Full building power systems
High-capacity inverters & generators

Key Features (Both Models)
Dual Power Switching: Easily switch between grid and backup power
I – 0 – II Positions:
I = Main Power
0 = OFF
II = Backup Power
Manual Operation: Simple, reliable control
DIN Rail Mounting: Fits standard distribution boards
Strong Build Quality: Designed for long-term use
Safe Isolation: Prevents power backfeed
What Customers Should Know
Choose 63A for smaller setups and lower load demand
Choose 125A for full-house or commercial use
Always match the switch rating with your system load

Why Buy This
Protects your electrical system
Gives full control during power outages
Compatible with solar, inverter, and generator setups
Trusted for residential and commercial installations

Installation Note
Installation should be done by a qualified electrician to ensure safety and correct wiring.
NOTE: The Small One Price (63A)

CMONE Manual Transfer Switch (Changeover Switch)

The CMONE SF125 125A Manual Changeover Switch is a heavy-duty power transfer device designed for switching between two power sources such as the grid and a generator or inverter system. With a higher current capacity and 4-pole design, it is ideal for larger homes, commercial spaces, and industrial setups that require stable and safe power switching.

Key Specifications
Model: SF125
Brand: CMONE
Rated Current: 125 Amps
Rated Voltage: 230V AC
Frequency: 50/60Hz
Poles: 4 Pole (4P)
Standard: IEC/EN 60947-3
Class: PC
Mounting: DIN Rail
Terminals: 8 (for full phase + neutral switching)

Key Features
High Load Capacity (125A): Suitable for large electrical systems
4-Pole Switching: Disconnects both live and neutral for maximum safety
Dual Power Switching: Grid ↔ Generator / Inverter
Manual Lever Control: Strong, reliable switching mechanism
Fast Switching Performance: Designed for minimal delay
Industrial Grade Build: Durable and long-lasting
Clear Terminal Labeling: Easy wiring and installation

Applications
Large residential buildings
Commercial properties (shops, offices)
Solar and inverter systems
Generator backup systems
Industrial control panels
What It Can Handle

This 125A switch can support:
Full building electrical loads
High-capacity inverters and solar systems
Multiple AC units, pumps, and heavy appliances
Why This Product Stands Out
Higher capacity than standard 63A switches
Safer full isolation (4-pole switching)
Built for demanding environments
Reliable during frequent power outages

Installation Note
Must be installed by a qualified electrician due to high current capacity and multi-phase wiring.

CMONE SF125 125A Manual Changeover / Transfer Switch (230V)

CMONE SFT 263 Manual Transfer Switch is a compact and reliable dual power changeover switch designed for safely switching between two power sources such as the national grid and a generator or inverter system. Built for efficiency and safety, this device ensures smooth manual control of your power supply without risk of backfeed or electrical conflict.

Key Specifications
Model: SFT 263
Brand: CMONE
Rated Current: 63 Amps
Rated Voltage: 400V AC
Poles: 2 Pole (Double Pole)
Operation Mode: Manual
Switch Positions: I – 0 – II
Mounting Type: DIN Rail

Key Features
Dual Power Control: Easily switch between NEPA/grid and generator or inverter
Safe Isolation: Center “OFF (0)” position completely disconnects power
Heavy-Duty Performance: Handles up to 63A load capacity
Compact Design: Fits neatly into distribution boards
Durable Terminals: Strong screw terminals for firm cable connection
Clear Labeling: Easy identification of switch positions

Applications
Residential homes
Solar & inverter systems
Generator backup setups
Small offices and shops
Electrical control panels
What It Can Handle

This 63A switch is suitable for:
Full household changeover systems
Medium inverter installations
Basic commercial electrical loads

Why Customers Buy This
Prevents generator backflow into grid
Simple manual operation (no complexity)
Reliable during power outages
Long-lasting electrical safety solution

Installation Note
For best performance and safety, installation should be done by a qualified electrician.

CMONE SFT 263 63A 400V Manual Transfer Switch (Changeover Switch)

The device provides both overload (long-time delay) and short-circuit (instantaneous) protection for electrical circuits.

Molded Case Circuit Breaker (MCCB)

The device features a manual knob for manual operation and a switch to select between manual and automatic transfer modes.

CMONE MLQ5-100/4P Automatic Transfer Switch

The device automatically switches to a backup power source (such as a generator or inverter) when the primary power supply fails.

CMONE MLQ2-125/2P Automatic Transfer Switch (ATS)

typically used for solar photovoltaic (PV) systems to protect against overloads and short circuits.

LINZIELE DC Molded Case Circuit Breakers (MCCBs)

Monitors three-phase power to protect against overvoltage, undervoltage, and overcurrent conditions.

3-Phase Adjustable Voltage

Light up your space with the 100W Solar Street Light, a reliable and energy-efficient lighting solution designed for homes, streets, and commercial areas. This all-in-one unit combines a high-efficiency solar panel, durable lithium battery, and powerful LED chips to deliver bright illumination without electricity costs. Built for outdoor performance, it automatically turns ON at night and OFF during the day, providing hassle-free, maintenance-free lighting all year round. Perfect for areas with unstable power supply, this solar light ensures consistent lighting and enhanced security.

⚙️ Key Features
🌞 Solar Powered – No electricity bills
💡 High Brightness LED – Clear, wide illumination
🔋 Long Battery Backup – 8–12 hours lighting time
🌙 Auto Dusk-to-Dawn – Works automatically
🚶 Motion Sensor – Saves energy, increases brightness when movement is detected
🌧️ IP65 Waterproof – Works in rain and harsh weather
🔧 Easy Installation – No wiring required

⚡ Specifications
Power: 100W
Lighting Area: 80–120 m²
Mounting Height: 3–5 meters
Battery Type: Built-in Lithium Battery
Charging Time: 6–8 hours (sunlight)
Working Time: 8–12 hours
Material: Durable ABS + Aluminum

TPALA 100W Solar Street Light (All-in-One LED – Outdoor)

TPALA 300W Double-Head Solar Street Light is a powerful outdoor lighting solution designed for wide-area illumination. With its dual-head design, it spreads light evenly across both sides, making it ideal for streets, estates, and commercial spaces. This all-in-one system includes a high-efficiency solar panel, lithium battery, and smart controller, ensuring reliable lighting without electricity costs.

⚙️ Key Specifications
Power: 300W
Design: Double-head (dual LED lamps)
Battery Type: Built-in Lithium Battery
Solar Panel: High-efficiency mono/poly panel
Lighting Mode: Automatic dusk-to-dawn
Sensor: Motion detection (energy saving)
Control: Remote control included
Waterproof Rating: IP65 (rain & dust resistant)
Installation: Pole / wall mount

🔌 Key Features
🌟 Dual-head design for wider coverage
🔋 Long battery backup (8–12 hours lighting)
🌙 Auto ON at night / OFF during the day
⚡ Zero electricity cost (solar powered)
🌧️ Weatherproof for outdoor use
🎮 Remote control for brightness & timing
⚡ Coverage & Performance
Lighting Area: Large (up to ~200–300 sqm)
Height Recommendation: 5–7 meters pole
Brightness: High lumen output for clear visibility

🏠 Best Use Cases
Estates & residential streets
Parking lots
Schools & compounds
Shops & business premises
Security lighting

TPALA 300W Double-Head Solar Street Light

TPALA 400W Double-Head Solar Street Light is a high-performance lighting system designed for large areas and heavy-duty use. Its dual-head design ensures maximum coverage and brightness.

⚙️ Key Features
Power: 400W
Dual high-lumen LED heads
Long-lasting lithium battery
Large area illumination
Smart control (auto + remote)
Heavy-duty waterproof build

⚡ Best For
Highways
Large compounds
Industrial zones

TPALA 400W Double-Head Solar Street Light

CMONE DC Surge Protector (MLY1-C40) is a high-performance protection device designed to protect solar power systems and DC circuits from lightning strikes, voltage spikes, and electrical surges. Installed between your solar panels and inverter, this device safely diverts excess voltage to ground, preventing damage to expensive equipment like inverters, batteries, and charge controllers. Built for harsh environments, it is ideal for residential, commercial, and industrial solar installations.

⚙️ Key Specifications
Brand: CMONE
Model: MLY1-C40
Rated Voltage (Uc): 1000V DC
Maximum Discharge Current (Imax): 40kA
Nominal Discharge Current (In): 20kA
Voltage Protection Level (Up): ≤ 3.2kV
Poles: 2P (DC+ / DC− protection)
Mounting: DIN Rail
Standard: IEC / GB/T18802 compliant

🔌 Key Features
Protects against lightning & surge damage
Dual protection (DC+ and DC− lines)
Fast response time (nanoseconds)
Visual status indicator (green = working)
Easy DIN rail installation
Replaceable module design
⚡ What It Does
👉 When a surge occurs:
Absorbs excess voltage
Diverts it safely to earth (ground)
Prevents damage to your system
⚡ Where It Is Used
✅ Common Applications:
Solar panel arrays (PV side protection)
Between panels → inverter
Combiner boxes
DC distribution boards
Off-grid & hybrid solar systems
🔋 System Compatibility
12V / 24V / 48V solar systems
3KVA – 10KVA inverters
Lithium & tubular battery setups
All solar PV installations up to 1000V

⚡ What It Protects
Solar panels
Inverters (like Ragnar 6)
Lithium batteries (like C-Worth 15kWh)
Charge controllers
DC wiring systems

CMONE DC Surge Protection Device (SPD) – 1000V | 40kA | Dual Pole

Digital Voltage Protector is an intelligent protection device designed to safeguard your electrical appliances and solar/inverter systems from voltage fluctuations, surges, and abnormal power conditions. Unlike stabilizers, this device does not regulate voltage, it automatically cuts off power when voltage is too high or too low, then restores it when it becomes stable. It prevents damage to expensive equipment like inverters, refrigerators, TVs, and air conditioners.

⚙️ Key Specifications
Rated Voltage: 220V – 240V AC
Frequency: 50/60Hz
Current Range: 1 – 63 Amps (adjustable depending on model)
Display: Digital LED voltage display
Installation: DIN Rail (distribution board mounting)
Power Consumption: <2W
🔧 Core Protection Features
✅ Over-voltage protection
✅ Under-voltage protection
✅ Over-current protection
✅ Surge / spike protection
✅ Automatic power cut-off
✅ Auto recovery when voltage stabilizes
✅ Adjustable delay time (prevents frequent ON/OFF)

👉 It disconnects power when voltage goes outside safe limits to prevent damage to appliances.
Monitors incoming electricity continuously
If voltage is too high or too low → cuts power instantly
Waits (delay time) before restoring power
Reconnects only when voltage is stable

⚡ What It Can Protect
🏠 Home Use:
Refrigerators / Freezers
TVs & Decoders
Fans & Lights
Air Conditioners
Washing Machines
🔋 Solar / Inverter Systems:
Hybrid inverters
Lithium batteries
Solar charge controllers

Digital Voltage Protector

The ELEET 63A DC Breaker is a reliable protection device designed for medium-capacity solar systems, battery banks, and inverter installations. It safeguards your system from overload, short circuit, and electrical faults, ensuring stable and safe operation. Perfect for solar installations, this breaker provides fast disconnection during faults, preventing damage to your inverter, batteries, and wiring.

⚙️ Key Specifications
Brand: ELEET
Rated Current: 63 Amps
Voltage Rating: 500V – 1000V DC (solar systems)
Poles: 1P / 2P (depending on model)
Breaking Capacity: ~6kA
Trip Type: Thermal-Magnetic
Mounting Type: DIN Rail
Operation: Manual ON/OFF

🔌 Key Features
Protects solar panels, batteries, and inverter
Fast fault isolation (prevents damage)
Compact design for easy installation
Built specifically for DC systems (solar use)
Prevents overheating and fire risks
Durable and long-lasting
⚡ Where It Is Used
✅ Common Applications:
Between solar panels → inverter (PV protection)
Between battery → inverter (mid-size systems)
Solar combiner boxes
Medium residential solar setups
👉 A 63A DC breaker is commonly used for DC distribution panels and battery connections

🔋 System Compatibility
24V / 48V systems
3KVA – 6KVA inverters
Lithium & tubular batteries
Hybrid and off-grid solar systems

⚡ What It Protects
Inverters
Battery banks
Solar charge controllers
DC wiring systems

ELEET 63A DC Breaker

The ELEET 32A DC Breaker is a compact and reliable protection device designed for small to medium solar systems. It protects your solar setup from overcurrent, overload, and short circuits, ensuring safe operation of your inverter, battery, and solar panels. This breaker is ideal for isolating power during maintenance and preventing damage to sensitive components in your system.

⚙️ Key Specifications
Brand: ELEET
Rated Current: 32 Amps
Voltage Rating: Up to 500V – 1000V DC
Poles: 1P / 2P (depending on model)
Breaking Capacity: ~6kA
Trip Type: Thermal-Magnetic
Mounting Type: DIN Rail
Operation: Manual ON/OFF

🔌 Key Features
Protects solar panels, batteries, and inverter
Fast disconnection during faults
Compact design (ideal for small installations)
Easy installation on DIN rail
Designed specifically for DC systems (solar use)
Prevents fire and system damage

⚡ Where It Is Used
✅ Common Applications:
Between solar panels → charge controller/inverter
Small battery banks
Solar combiner boxes
Low-load solar systems

🔋 System Compatibility
12V / 24V / 48V solar systems
Small inverters (1KVA – 3KVA)
Solar street lights
CCTV & backup systems

⚡ What It Protects
Solar panels
Charge controllers
Batteries
Small inverters

ELEET 32A DC Breaker (Solar Protection Switch)

ELEET 125A DC Breaker is a high-performance protection device designed for solar power systems, battery banks, and inverter installations. It protects your system from overload, short circuit, and electrical faults, ensuring safe and reliable operation. This breaker is essential for isolating power between solar panels, batteries, and inverters, making maintenance and emergency shutdowns safe and easy.

⚙️ Key Specifications
Brand: ELEET
Rated Current: 125 Amps
Voltage Rating: Up to 1000V DC (typical solar use range)
Poles: 1P / 2P (depending on model)
Breaking Capacity: ~10kA
Trip Type: Thermal-Magnetic (automatic protection)
Mounting Type: DIN Rail / Panel Mount
Operation: Manual ON/OFF switch

🔌 Key Features
Protects inverter, battery & solar system
Fast disconnection during faults
Prevents fire and equipment damage
Compact and easy to install
Suitable for both residential & commercial solar systems
Designed for DC systems (important difference from AC breakers)

👉 DC breakers are specifically built to safely interrupt current without dangerous arcing, which is critical in solar systems

⚡ Where It Is Used
✅ Applications:
Between solar panels → inverter
Between battery → inverter
Solar distribution boards
Off-grid and hybrid systems

🔋 System Compatibility
48V battery systems
5KVA – 10KVA inverters
Lithium or tubular battery setups
Solar panel arrays

🏠 What It Protects
Inverters (like Ragnar 6)
Lithium batteries (like C-Worth 15kWh)
Solar charge controllers
Electrical wiring

ELEET 125A DC Breaker (Solar Protection Switch)

Lithium Battery C-worth 
The C-Worth 15kWh Lithium Battery is a high-capacity energy storage solution designed for solar systems, inverters, homes, and commercial use. Built with advanced LiFePO4 (Lithium Iron Phosphate) technology, it delivers long lifespan, high efficiency, and stable power output. This battery provides reliable backup power, stores solar energy efficiently, and reduces dependence on fuel generators. It is perfect for pairing with 5KVA – 10KVA hybrid inverters like the Ragnar 6 you showed earlier.

⚙️ Key Specifications
Battery Capacity: 15kWh
Nominal Voltage: 51.2V (48V system)
Battery Type: LiFePO4 Lithium (safe & long-lasting)
Rated Power Output: 5120W continuous
Peak Power: 10,240W
Max Charge/Discharge Current: 200A
Recommended Current: ≤100A

🔋 Performance
Cycle Life: 6000+ cycles (≈10–15 years lifespan)
Depth of Discharge: 80% (usable capacity)
Efficiency: High (minimal energy loss)

🔌 System Features
Expandable: Up to 6 batteries in parallel
Protection: Overcharge, over-discharge, temperature protection
Operating Temperature: -10°C to 60°C
Protection Rating: IP21 (indoor use)

⚡ What This Battery Can Power
✅ Can Power: 👉 When paired with a 5–6KVA inverter:
Entire house lighting (24–48 hours depending on usage)
TVs, decoders, fans
Refrigerator / freezer
Laptops & desktops
Routers & CCTV
1–2 Air Conditioners (short duration or optimized use)